Procedure A & B


 This is an extruding type plastometer which is made for testing procedure A and/or procedure B on the flow thermal plastic resin. It is made to meet JIS K7210, ISO1133 and ASTM D1238.



  • Compact, light weight and desk top
  • The center of the equipment (Piston, Cylinder, Die etc.) is little defacement and longterm stable
  • Automatically measured the move down time of the piston and displayed MFR and MVR result
  • Used dedicated printer, input data and results can be printed out (optional)
  • Used RS-232C cable, input data and results can be send your PC (option: dedicated connection cable and software)


Conforming standards JIS K7210, ISO1133, ASTM D1238
Test temperature range 80 ~ 300 °C
Temperature indication resolution 0.01 °C
Temperature sensor Pt
Temperature setting points 8
Auto measurement value MFR, MVR, travel time(move down time of the piston), pre-heat time
Indication MFR 0.0000~1999.9999 g/10min
MVR 0.0000~1999.9999 cm³/10min
Safety measures Excessive temperature rise prevention device, Earth leakage breaker, Fall prevention bracket
Outside dimensions W370×D510×H825 mm
Power supply AC100 V 50/60 Hz, 700 VA
(There is a option of step down transformer)
Device ambient conditions 20 ± 10 °C, 45~85 % RH