C/T Analysis System

Volume Graphics

 The Volume Graphics range of products comprising VGSTUDIO MAX , VGSTUDIO , VGinLINE , myVGL and VGMETROLOGY provides software solutions allowing all types of analyses and visualizations to be performed directly onthe voxel data.


Coordinate Measurement

  • Allows the 3D and 2D measurement
  • Geometric Dimensioning
  • Line and surface profile tolerancws
  • Create inspection plans on CAD data


Porosity/Inclusion Analysis

  • Allows to detect, analyze, and visualize pores, holes, and inclusions
  • Analyzation
    • Defect position
    • Defect compactness
    • Defect size and geometry


Wall Thickness Analysis

  • Automatically and quickly analyzes wall thicknesses
  • Application of tolerance with various parameters
  • Find weak point of the object
  • Create inspection plans on CAD data

Note : If wall thickness analyses are to be evaluated with the highest possible precision and within a precisely defined coordinate system, the optional Coordinate Measurement Module is required.


Fiber Composite Material Analysis

  • Display local fiber oreintation color coded as vector, tensors, and stream lines
  • Calculation
    • Local fiber orientations
    • Local fiber volume fraction


Foam Structure Analysis

  • Determine cell structure in porous foams and filter materials
    • Avarage values for cell volume, surface, and diameter
    • Contact surfaces
    • Average strut trickness
    • Euler numbers and characteristics
    • Average and total curvature and many more
  • View your result color coded as a histogram or as a table


Structural Mechanics Simulation

  • Performs virtual stress tests on your scanned part and helps you assess the impact of discontinuties on the part's stability
  • Identifies the most likely locations of failure with the automatic hotspot analysis
  • Support three load types
    • Direct force
    • Torque
    • Pressure
  • Calculates and visualizes force lines, local displacements, and failure-related variables such as von-Mises stress or the absolute maximum principal stress


CAD Import


  • Uses native CAD files such as CATIA V5 and Creo/Pro/ENGINEER for norminal/actual comparisons, segmentation, and other tasks


  • Understands so-called Product and Manufacturing Information(PMI) that is generated in many current CAD systems and which provides additional part information


Transport Phenomena Module

  • Perform microstructure level virtual flow and diffusion experiments directly on CT scans of porous and multi-component materials-no meshing required
  • Calculate homogenized material propoties such as absolute permeability, tortuosity, formation factor, molecular diffusivity, electrical resistivity, themal conductivity or porosity
  • Calculate tensor-valued material properties for anisotropic samples
  • Stop and re-start the calculation at any time to inspect intermediate results
  • Use one or more GPUs to speed up calculations thanks to OpenCL


Capillary Pressure Module

  • Provides quantities that are used, e.g., in geosciences to characterize soil and rock samples
  • Computes the pore size distribution and the capillary pressure drainage curve for a scanned porous material
  • Performs virtual MICP (mercury injection capillary pressure) experiments